FEATURES
- Provides excellent initial gloss and gloss retention even with fewer coats
- Requires fewer initial coats and typically only one coat when recoating to achieve a high gloss appearance level
- Superior resistance to scratching, black heel marks, and scuffing
- Excellent clear color retention (non-yellowing)
- Excellent gloss build compared to conventional scrub and recoat products
- Low odor is ideal for use in patient rooms, busy hallways, aisles, and 24-hour facilities
- Meets ASTM D-2047 slip resistance requirements
GENERAL USE DIRECTIONS
- Strip floor using your preferred floor stripper.
- Apply a maximum of 3 medium coats of TimeSaver SR finish using a clean mop.
- After 24 hours, additional coats may be applied until desired gloss is achieved.
- Allow 30-40 minutes of drying time between coats.
- Allow finish to cure for 24 hours before burnishing or applying extra coats.
- Apply no more than 3 coats in a 24-hour period.
- Dust mop or sweep.
- Clean floor with mop or autoscrubber using a floor cleaner.
- Enhance appearance using any of the following methods:
- Spray buff with a red pad and 175-1500 RPM equipment.
- Dry buff using a medium to aggressive pad and 1500 RPM burnisher.
- Dust mop or sweep.
- Deep scrub floor with mop or autoscrubber using a floor cleaner.
- Apply 1 or 2 uniform coats of TimeSaver SR finish using a clean mop.
- Allow finish to cure for 24 hours before burnishing.
Reviews
There are no reviews yet.