Headgear with Face Shield
The headgear with facial shield / visor provides maximum face protection and comfort. It offers full face coverage from impact, flying particles, and liquid splashes. The ratchet suspension system allows for quick and easy adjustment. The “turn button” visor attachment holds face shields securely in place and the foam cushion brow pad absorbs perspiration.
Related products
ProFlex 1650 Elastic Back Support
Reduce the risk of back injuries with this all elastic back support with a 7.5" body for extra firm support. Provides lower back and abdominal support when you lift by tightening the back support to enhance your body's intra-abdominal pressure and move the stress away from your spine.
P100 Particulate Filters
The 3M P100 particulate filter helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants.
Tyvek 400 TY454S Boot Covers
The Tyvek boot covers are slip-resistant 18" high covers with an elastic top that provides coverage up to the calf. Tyvek 400 fabric offers an inherit barrier against particles down to 1.0 micron in size. Protection is built into the fabric itself with no films or laminates to abrade or wear away. The Tyvek 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion.
KleenGuard A20 Particle Protection Coveralls
The KleenGuard personal protection equipment enables rather than inhibits you, allowing for maximum productivity and safety. These coveralls offer suprior particle holdout coupled with unmatched comfort attributes. The A20 fabric is composed of five layers of stacked barrier protection (SMMMS) against hazardous particles.
Dust Mask
Our cone dust mask respirators provide a comfortable contoured fit while protect workers from nuisance dust particles.
Safety Eyewear Glasses
These ANSI approved safety glasses have an adjustable temple for enhanced fit and are ANSI approved.
Half Facepiece Respirator
The 3M half facepiece reusable respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps allow for a customized fit to the user.
Hard Hat with Ratchet Suspension
The 3M hard hat with 4-Point ratchet suspension H-700 series is comfortable, tough and lightweight safety headgear that helps protect the top of the head due to the potential hazard of small falling objects or exposed fixed objects that may be bumped into. The rigid shell of the hard hat helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this safety headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling. Something as small as a washer or coin can strike with the force of several pounds if it falls far enough. 3M hard hats reduce the impact if a strike occurs.
Reviews
There are no reviews yet.