FEATURES
- Provides diamond-like clarity and gloss
- Cures on the floor faster than traditional floor coatings, saving time and labor
- Resists dirt embedment, black heel marks, scratching, and scuffing
- Provides better buff response
- Versatile finish responds well to 175-1500 RPM equipment
- Reduced VOCs of 54.4% results in significantly decreased odors
- Meets ASTM D-2047 slip resistance requirements
GENERAL USE DIRECTIONS
- Strip floor using your preferred floor stripper.
- Apply 2-3 uniform coats of Vectra finish using a clean mop.
- Apply additional coats until desired gloss is obtained.
- Allow 30 minutes of drying time between coats.
- Allow finish to cure for 24 hours before buffing.
- Dust mop or sweep.
- Clean floor with mop or autoscrubber using a floor cleaner.
- If desired, buff using preferred maintainer to enhance gloss.
- Dust mop or sweep.
- Deep scrub floor with mop or autoscrubber using a floor cleaner.
- Apply 1 or 2 uniform coats of Vectra finish using a clean mop.
- Allow finish to cure for 24 hours before buffing.
Reviews
There are no reviews yet.