FEATURES
- Clean, shines, and protects when used on a regular basis
- Retains color clarity (non-yellowing)
- Can also be used for the rejuvenation, restoration, and daily cleaning of stone flooring
- Meets ASTM D-2047 requirements for slip resistance
GENERAL USE DIRECTIONS
Autoscrubber
- Dust mop or sweep.
- Blockade areas to be cleaned, floors will be very slippery until dry.
- Add 4 oz per gallon of Wiwax to lukewarm water.
- Scrub floor with product.
- Trail mop excessive wet areas behind scrubber.
- Do not rinse floor after cleaning.
- Let floor dry completely.
Mop and Bucket
- Dust mop or sweep.
- Blockade areas to be cleaned, floors will be very slippery until dry.
- Add 2 oz per gallon of Wiwax to lukewarm water.
- Mop floor clean with this product.
- Pick up soil and excess cleaner with a tightly wrong-out cleaning mop.
- Do not rinse floor after cleaning.
- Let floor dry completely.
- Dust mop or sweep.
- Blockade areas to be cleaned, floors will be very slippery until dry.
- Add 1 oz per gallon of Wiwax to warm water.
- Scrub floor with product using an autoscrubber and floor pad.
- Trail mop excessive wet areas behind scrubber.
- Do not rinse floor after cleaning.
- Let floor dry completely.
Autoscrubber
- Dust mop or sweep.
- Blockade areas to be cleaned, floors will be very slippery until dry.
- Add 13 oz per gallon of Wiwax to lukewarm water.
- Scrub floor with product.
- Trail mop excessive wet areas behind scrubber.
- Do not rinse floor after cleaning.
- Let floor dry completely.
Mop and Bucket
- Dust mop or sweep.
- Blockade areas to be cleaned, floors will be very slippery until dry.
- Clean floor with a neutral floor cleaner.
- Add 13 oz per gallon of Wiwax to lukewarm water.
- Mop floor clean with this product.
- Pick up soil and excess cleaner with a tightly wrong-out cleaning mop.
- Do not rinse floor after cleaning.
- Let floor dry completely.
- Dust mop or sweep.
- Blockade areas to be cleaned, floors will be very slippery until dry.
- Add 2 oz per gallon of Wiwax to warm water.
- Scrub floor with product using an autoscrubber and floor pad.
- Complete 6 passes with autoscrubber over entire area.
- Trail mop excessive wet areas behind scrubber.
- Do not rinse floor after cleaning.
- Let floor dry completely.
- Apply a thin, uniform coat of product like Crystal Shield, allowing 20-30 minutes of dry time.
- Burnish the floor with the proper floor pad.
- Apply a second thin, uniform coat of product.
- For optimum appearance, alternate use of this product at standard dilution and a degreaser once desired shine is achieved.
- On heavily worn rubber floors, apply up to 3 coats of Wiwax using the mop and bucket cleaning instructions with a 1:1 dilution ratio until desired shine is achieved.
- If high gloss is desired, apply instead, 3 coats of Carefree floor finish.
Reviews
There are no reviews yet.